Precautions for application of screw dehydrator

1. Before starting up, check whether there are sundries hidden in the parts of the equipment itself. After each equipment is used up, check the screw shaft head, the equipment tank, and the filter body. Large slag blocks, wood blocks, and metal should be cleaned up in time.

2. After turning on the machine, stop checking and watch carefully whether the rotation of the screw shaft, the mud level of the groove and other components are in normal operation.

3. The sewage is added evenly, avoiding too much emphasis, causing the machine to vibrate too much, and not overloading. After working for a long time, the power should be turned off, and the brake should be stopped for inspection. During work, do not brake the opening and closing arm to avoid damage to the blue belt. and other parts.

4. When shutting down, first turn off the sludge feed pump, stop feeding the sludge, then turn off the dosing pump and the dosing system, stop dosing, drain all the sludge and then turn off, then manually spray the filter body for 5 minutes, put Rinse the device clean, then turn off the power.

https://www.biocell-enviro.com/